91
4. Special features
Registering authorized users
If you have connected your machine to a network and set up the
network parameters correctly, you can scan and send images over
the network. To send a scanned image through email or via network
server safely, you must register account information of authorized
users to your local machine using SyncThru™ Web Service.
1
Access the SyncThru™ Web Service (see "Using SyncThru™
Web Service" on page 133).
2
Click Login on the upper right of the SyncThru™ Web Service
website.
3
Type in the ID and Password then click Login.
• ID: admin
• Password: sec00000
4
Click Security > User Access Control > Authentication.
5
Select Local Authentication in the the Authentication
Method, and click Apply.
6
Click OK in the confirmation pop-up window.
7
Click User Profile > Add.
8
Enter User Name, Login ID, Password, Confirm Password, E-
mail Address, and Fax Number.
You can easily add individual address if you check Yes for
Add individual(s) after this group is created.
9
Click Apply.
To Next Page
Loading...
