Wired network setup
14
2. Using a network-connected machine
3
Double-click the file and Safari will automatically open, then
select Trust. The browser will open the SetIPapplet.html
page that shows the printer’s name and IP address
information.
4
Click the icon (third from left) in the SetIP window to open
the TCP/IP configuration window.
5
Enter the machine’s new information into the configuration
window. In a corporate intranet, you may need to have this
information assigned by a network manager before
proceeding.
Find the machine’s MAC address from the Network
Configuration Report (see "Printing a network
configuration report" on page 12) and enter it without the
colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
6
Select Apply, then OK, and OK again.
7
Quit Safari.
IPv4 configuation using SetIP (Linux)
Before using the SetIP program, disable the computer firewall from
System Preferences or Administrator.
The following instructions may vary from your model or
operating systems.
1
Open /opt/Samsung/mfp/share/utils/.
2
Double-click the SetIPApplet.html file.
3
Click to open the TCP/IP configuration window.
4
Enter the machine’s new information into the configuration
window. In a corporate intranet, you may need to have this
information assigned by a network manager before
proceeding.
Find the machine’s MAC address from the Network
Configuration Report (see "Printing a network
configuration report" on page 12) and enter it without the
colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
To Next Page
Loading...
