IPv6 configuration
29
2. Using a network-connected machine
11
Setting IPv6 addresses
The machine supports the following IPv6 addresses for network
printing and managements.
• Link-local Address: Self-configured local IPv6 address (Address
starts with FE80).
• Stateless Address: Automatically configured IPv6 address by a
network router.
• Stateful Address: IPv6 address configured by a DHCPv6 server.
• Manual Address: Manually configured IPv6 address by a user.
DHCPv6 address configuration (Stateful)
If you have a DHCPv6 server on your network, you can set one of the
following options for default dynamic host configuration.
1
Select (Menu) > Network > OK > TCP/IP (IPv6) > OK >
DHCPv6 Config on the control panel.
2
Press OK to select the required value you want.
• DHCPv6 Addr.: Always use DHCPv6 regardless of router
request.
• DHCPv6 Off: Never use DHCPv6 regardless of router
request.
• Router: Use DHCPv6 only when requested by a router.
Manual address configuration
1
Start a web browser, such as Internet Explorer, that supports
IPv6 addressing as a URL.
2
When the SyncThru™ Web Service window opens, move the
mouse cursor over the Settings of the top menu bar and then
click Network Settings.
3
Click TCP/IPv6 on the left pane of the website.
4
Select the Manual Address check box. Then, the Address/
Prefix text box is activated.
5
Enter IPv6 address and a prefix length (e.g.,:
3FFE:10:88:194::AAAA/64).
6
Click the Apply button.
To Next Page
Loading...
