Wireless network setup
34
2. Using a network-connected machine
- SharedKey: Authentication is used. Enter the WEP
Key after selecting SharedKey.
• WPA-PSK or WPA2-PSK: You can select WPA-PSK or
WPA2-PSK to authenticate the print server based on WPA
Pre-Shared Key. This uses a shared secret key (generally
called Pre-Shared Key passphrase), which is manually
configured on the access point and each of its clients.
a Press OK when WPA-PSK or WPA2-PSK appears of on
the display.
b Press OK to select TKIP or AES in Encryption. If you
select WPA2-PSK, press OK to select AES or TKIP +
AES in Encryption.
c Enter the WPA Key.
6
Press OK.
Disconnect the network cable (standard or crossover). Your
machine should then start communicating wirelessly with
the network. In case of Ad-hoc mode, you can use a wireless
LAN and wired LAN simultaneously.
16
Setup using Windows
Shortcut to Wireless Setting program without CD: If you
have installed the printer driver once, you can access the
Wireless Setting program without CD. From the Start menu,
select Programs or All Programs > Samsung Printers >
your printer driver name > Wireless Setting Program.
Access point via USB cable
► Items to prepare
•Access point
• Network-connected computer
• Software CD that was provided with your machine
• The machine installed with a wireless network interface
•USB cable
► Creating the infrastructure network
1
Check whether the USB cable is connected to the machine.
2
Turn on your computer, access point, and machine.
To Next Page
Loading...
