Samsung SCX-483xFD - Scan Motor; Home Position Sensor

3. Disassembly and Reassembly
Service Manual
SCX-483x/5x3x series
3-8
Samsung Electronics
3.3.2.3 Scan Motor
1. Remove the DADF unit, OPE unit and Platen
glass unit. (Refer to 3.3.2.1~2)
2. Remove 4 screws.
3. Release the scan motor after removing 3 screws.
3.3.2.4 Home position sensor
1. Remove the Platen glass unit. (Refer to 3.3.2.2)
2. Release the home position sensor after unplugging the connector.