Samsung SCX-483xFD - Main drive unit

3. Disassembly and Reassembly
Service Manual
SCX-483x/5x3x series
3-20
Samsung Electronics
3.3.11 Main drive unit
1. Remove the left cover. (Refer to 3.3.1 Cover)
2. Remove the Bar coupler.
3. Remove the main drive unit after removing
6 screws.
NOTE
When reassembling the main drive unit, tighten 6
screws in order as shown above.
4. Unplug the connector from the main motor.
5. Release the main drive unit.
Bar couplerBar coupler
1
2
3
4
5
6
1
2
3
4
5
6