Samsung SCX 6322DN - B/W Laser - All-in-One - Page 63

Samsung Electronics
Service Manual
5-9
10. Remove the four screws securing the Scan Main
Ass'y and remove it.
11. Unplug the Open Cover Sensor connector and
remove the Open Cover Ass'y in the direction of
arrow. Then release the harness, as shown below.
12. Open the Cover Exit Ass'y and unplug the two con-
nectors.
13. Remove the three screws securing the Guide Pickup
Ass'y and remove it.
DADF Sub Ass'y
Platen Ass'y
Cover Exit Ass'y
Guide Pickup Ass'y
COVER OPEN ASS'Y
2
1