Initial settings and testing of the machine_ 41
Print adjustment (Dual cassette feeder or High capacity feeder)
If you have installed the dual cassette feeder or high capacity feeder on the machine, you have to print adjustment before
using the machine. The procedure of print adjustment for both cassette feeders is same. The explanation in this user’s
guide is based on the dual cassette feeder.
• If you have installed the dual cassette feeder, select Tray 3 and Tray 4 for print adjustment.
• If you have installed the high capacity feeder, select Tray 3 for print adjustment.
1. Press Machine Setup from the display screen.
2. Press Machine Setup > General Settings > Machine Test.
3. Press ID’s input area. The pop-up keyboard appears.
Enter the name which is entered in the initial setting step 6 (See "Press the Name input area." on page 37).
Then press OK on t
he pop-up keyboard.
You can also select the ID pressing Recent
users.
4. Press
Password’s input area. The pop-up keyboard appears.
Enter the password which is entered in the initial setting step 6 (See "Press the Name input area." on page 37).
Then press OK on t
he pop-up keyboard.
5. Press
Domain’s input area. The pop-up keyboard appears.
Press L, O, C, A, L and press OK on the p
op-up keyboard.
You can also select the domain name by pressing D
omain List.
The domain name may differ for your machine depending on its options or models.
6. Press
OK.
install_guide_english.book Page 41 Saturday, July 21, 2012 4:53 PM
To Next Page
Loading...
