Samsung SE200 SERIES

15
Installing a Wall-mount Kit or Desktop Stand
Before Installation
―
Power the product off and remove the power cable from the power socket.
SE200 Series
Place a protective cloth or cushion on a flat surface. Next,
place the product with the face down on top of the cloth or
cushion.
Hold the main body of the product with your hand as shown
by the figure.
Pull the stand in the direction of the arrow as shown in the
figure to separate it.
SE450, SE650 Series
Place a protective cloth or cushion on a flat surface. Next,
place the product with the face down on top of the cloth or
cushion.
Unfasten the screw from the back of the product.
Lift and detach the stand.