To use a wired network with a 2014 TV that has an Evolution Kit
attached, disconnect the LAN cable from the TV, and then connect it
to the Kit using the LAN Cable Adapter.
To use a wired network with a 2013, connect
the LAN cable to the TV.
6. Plug the TV’s power cable into an outlet.
Upgrading the TV’s Software
1. Turn on the TV, and then wait for the TV to recognize the Evolution Kit (up to 10 seconds).
2. Once recognized, the Evolution Kit automatically updates the TV’s software. Wait for the update process to finish.
✎
The TV will turn off and on automatically after completing the software update.
3. Follow the directions on the screen to set up the initial settings.
SEK3000_ZA_BN68-07377E-01_L02.indb 6 2016-10-18 오후 5:24:20
To Next Page
Loading...
