English-9
Installing Batteries into the Samsung Smart Control
To install the batteries, push the rear cover open in the direction
of the arrow and insert the batteries as shown in the figure. Make
sure that the positive and negative ends are facing in the correct
direction.
✎
Alkaline batteries are recommended for longer battery life.
Pairing the Smart Control with the TV
Press the button on the Samsung Smart Control to turn on the TV. The Samsung Smart Control pairs with the TV
automatically. If this is the first time you have turned on the TV, the Initial Setup screen appears. Follow the directions on the
screen to set up the TV.
If the Samsung Smart Control Does Not Pair
If the Samsung Smart Control does not pair with the TV
automatically, point it at the remote control sensor of the TV,
and then press and hold the buttons labeled ① and ② in the
diagram simultaneously for 3 seconds or more.
˾
˿
<The Samsung Smart Control’s pairing buttons>
SEK3000_ZA_BN68-07377E-01_L02.indb 9 2016-10-18 오후 5:24:21
To Next Page
Loading...
