Samsung SH09YAB - Flare Modification; Tools Used; Flare Modification Procedure

Samsung Electronics 3-9
Operating Instructions and Installation
3-2-2(f) Flare Modification
Flare modification procedure
1) Cut the pipe using a pipe cutter.
• Tools used
2) Remove burrs at the tip of the pipe cut.
Caution : Burrs not removed may result in
leakage of gas.
3) Insert a flare nut into the pipe and
modifty flare.
* Unproper flaring
Outer diameter A(mm)
ø6.35mm 1.3
ø9.52mm 1.8
ø12.7mm 2.0
90
D
A
Oblique Raughness Burr
Pipe
Reamer
Inclined Surface
damaged
Cracked Uneven
thickness
D
A