Settings 111
Advanced Wi-Fi settings
1. From a Home screen, touch
Menu
➔
Settings
➔
Wireless & network
➔
Wi-Fi settings
➔
Advanced
.
• Wi-Fi sleep policy
: Specify when to switch from Wi-Fi to mobile
data for data communications. Touch to choose from
When screen
turns off
,
Never when plugged in
, or
Never
.
• MAC address
: View your phone’s MAC address, needed for
connecting to some secured networks (not configurable).
•Proxy
: Touch to enter a proxy number.
•Port
: Touch to enter a port number.
• IP Settings
–
Use static IP
: Touch to use a static IP. When enabled, a check mark
displays in the checkbox.
–
IP address
: When using a static IP, enter the IP address.
–
Gateway
: When using a static IP, enter the Gateway.
–
Netmask
: When using a static IP, enter the Netmask.
–
DNS 1
: When using a static IP, enter the DNS 1 value.
–
DNS 2
: When using a static IP, enter the DNS 2 value.
Bluetooth
Your phone supports Bluetooth
®
3.0.
Bluetooth profiles
Bluetooth profiles are specifications for services supported by
individual devices. Profiles improve the ability of different devices
to work together. Your phone supports these Bluetooth profiles:
•
Headset
: HSP v1.1 profile supports use of a compatible Bluetooth
headset for mono voice.
•
Handsfree
: HFP v1.5 profile supports Bluetooth headsets, and may
also support other installed compatible Bluetooth devices with
speakerphone capabilities.
•
Stereo
: A2DP v1.0, AVRCP v1.0, GAVDP and AVDTP profiles support
delivery of stereo audio to a compatible Bluetooth device.
•
Phonebook Access
: PBAP v1.0 profile allows sharing of multiple
name card and phonebook entries with a compatible Bluetooth device.
•
Object Push
: OPP v1.1 profile allows sending and receiving of contact
name cards (vCard 2.1) and calendar events (vCalendar) between
devices.
Note:
This device does not support all Bluetooth profiles.
i500.book Page 111 Friday, October 7, 2011 11:20 AM
To Next Page
Loading...
