Samsung Showcase - Location & Security

Settings 121
Animation
Set the level of animations for transitions between screens.
1. From the Home screen, touch Menu ➔ Settings ➔
Display settings ➔ Animation .
2. Touch No animation , Some animations , or All animations .
Screen timeout
Set the length of delay between the last key press or screen
touch and the automatic screen timeout (dim and lock).
1. From the Home screen, touch Menu ➔ Settings ➔
Display settings ➔ Screen timeout .
2. Touch a setting to select it.
Power saving mode
When enabled, your phone will automatically analyze the screen
and adjust the brightness to conserve battery power.
1. From the Home screen, touch Menu ➔ Settings ➔
Display settings .
2. Touch Power saving mode to enable or disable the mode.
When enabled, a check appears in the check box.
Location & security
We value your privacy and because of this, your phone is
defaulted to only acquire your location when you dial 911. To use
Location-Based Services, you must first enable location services
on your phone.
My Location
Use wireless networks
Enable or disable location service from your Wireless Provider.
Note: Network location services must be enabled to use some applications.
Important!: By selecting Network location services , you are enabling your
Wireless Provider and third-party authenticated and validated
location-enabled services access to certain location information
available through this network or device.
1. From a Home screen, touch Menu ➔ Settings ➔
Location & security .
2. Touch Use wireless networks to enable or disable Network
location services. When enabled, a check mark appears in
the check box.
i500.book Page 121 Friday, October 7, 2011 11:20 AM