88
Scanning and Connecting to a Wi-Fi Network
When you turn on Wi-Fi, your phone searches for available Wi-Fi
connections, then displays them on screen.
1. From the Home screen, sweep your finger downward to
display the Notification Panel.
2. Touch
Wi-Fi
to turn Wi-Fi On.
3. When your phone completes a scan, touch a Wi-Fi network
to connect. If the Wi-Fi network is open, you will be
automatically connected. If the Wi-Fi network is secured,
enter the password at the prompt to connect.
Adding a Wi-Fi Network Manually
1. From the Home screen, sweep your finger downward to
display the Notification Panel.
2. Touch
Wi-Fi
to turn Wi-Fi On.
3. On the pop-up Wi-Fi settings menu, touch
Add network
,
then enter these fields:
• Network Name (SSID)
: Enter the name of the Wi-Fi Wireless
Access Point.
• Security
: Select the type of security used by the WAP.
• Password
or
Key
: If the WAP is secured, enter the password or hex
key.
i500.book Page 88 Friday, October 7, 2011 11:20 AM
To Next Page
Loading...
