Wireless network setup
181
2. Using a Network-Connected Machine
3
Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CD-
ROM drive and click OK.
• For Windows 8,
If the installation window does not appear, from Charms, select
Search > Apps and search for Run. Type in X:\Setup.exe, replacing
“X” with the letter that represents your CD-ROM drive and click OK.
If “Tap to choose what happens with this disc.” pop-up window
appears, click the window and select Run Setup.exe.
4
Read and check The software End User License Agreement and Using
Enhanced Features and Participating in Printer Usage Information
Collection Program (optional). Then, click Next.
5
Select Configure the wireless network connection using USB cable
on the Printer Connection Type screen. Then click Next.
6
After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you want to use and click Next.
If the wireless network is already set up, the Wireless Network
Information window appears. Select I want to install software with
the current settings. (Recommended). Then, click Next.
To Next Page
Loading...
