Wireless network setup
183
2. Using a Network-Connected Machine
10
Select software to be installed.
11
After selecting the components, you can also change the printer driver
name, set the machine to be shared on the network, set the machine as
the default machine. Click Next.
12
Click Finish.
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an Ad-hoc wireless network by
following the simple steps below.
Items to prepare
• Network-connected computer
• Software CD that was provided with your machine
• A machine installed with a wireless network interface
• USB cable
Creating the ad hoc network in Windows
1
Check wheter the USB cable is connected to the machine.
2
Turn on your computer, access point, and machine.
To Next Page
Loading...
