Copy
210
3. Useful Setting Menus
2
Copy Setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 30).
To change the menu options:
Press (copy) > (Menu) > Copy Setup on the control panel.
Or (Menu) > Copy Setup on the control panel.
Book Copy
The Book Copy feature allows you to copy an entire
book. If the book is too thick, lift the cover until its
hinges are caught by the stopper and then close the
cover. If the book or magazine is thicker than 30 mm,
start copying with the cover open.
• Left Page: Use this option to print left page of the
book.
• Right Page: Use this option to print right page of the
book.
• Both Page: Use this option to print both pages of
the book.
This copy feature is available only when you
place originals on the scanner glass.
Item Description
Item Description
Change Default
The copy options can be set to those most frequently
used.
To Next Page
Loading...
