Fax
213
3. Useful Setting Menus
5
Receiving setup
Some menus may not appear in the display depending on options or models. If
so, it is not applicable to your machine (see
"Menu overview" on page 30
).
To change the menu options:
• Press (fax) > (Menu) > Fax Setup > Receiving on the control
panel.
• Or press Setup > Machine Setup > Next > Default Setting > Fax Default
on the touch screen.
• Or press Setup > Machine Setup> Next > Fax Setup on the touch screen.
Item Description
Redial Times
Sets the number of redial attempts. If you enter 0, the
machine will not redial.
Redial Term Sets the time interval before automatic redialling.
Prefix Dial
Sets a prefix of up to five digits. This number dials
before any automatic dial number is started. It is useful
for accessing a PABX exchange.
ECM Mode
Sends faxes using error correction mode (ECM) to
makes sure the faxes are sent smoothly without any
error. It may take more time.
• Fax Confirmation
• Fax Send
Confirmation
Sets the machine to print a report whether a fax
transmission was successfully completed or not.
If you select On-Error, the machine prints a
report only when a transmission is not
successful.
Image TCR
Prints a transmission report with a minimized image of
the first page of the fax sent.
Dial Mode
Sets the dialing mode to either tone or pulse. This
setting may not be available depending on your
country.
Toll Save
Sends faxes at a preset toll-saving time to save on call
costs. This setting may not be available depending on
your country.
Item Description
Receive Mode
Selects the default fax receiving mode (see "Changing
the receive modes" on page 274).
Item Description
To Next Page
Loading...
