Calibrations
25
Calibrations
Calibrations
In order to guarantee the stable and correct performance of components or sensors, it is
required to conduct calibrations through the
Self Repair Assistant
app after repair.
If the calibration results show any malfunctions, visit a Samsung Service Center for
further action. Any malfunctions caused by your repair may incur additional repair
charges.
In order to conduct the accurate calibrations after repair, visit a Samsung Service
Center or website to buy calibration equipment if you do not have any.
Used Parts and Calibration Functions in Supported Models
The calibration functions are automatically conducted based on the selected parts.
Optical Fingerprint Cal. Range Sensor Cal. Battery Cycle Resets.
Display Yes Yes No
Battery No Yes Yes
Back Glass No Yes No
Charging
Port
No Yes No
Depending on the model, the display module may include batteries. So when the
display module is replaced, the battery also has to be selected and a battery cycle
reset must be performed.
To Next Page
Loading...
