Samsung SM-S908B - Disassembly for Back Cover, Display, and Charging Port Replacement

Disassembly and Assembly
43
Item Quantity Image Description
Screw 3439
6001-003439
2
Screws for the upper speaker
(2 ea)
Screw 3428
6001-003428
19
Screws for the rear (15 ea)
Screws for the charging port
(3 ea)
Screw for the camera (1 ea)
Disassembly for Back Cover, Display, and Charging Port
Replacement
Before disassembling:
•
Unplug and turn off device before disassembling.
•
Remove the SIM card tray and S Pen. It is located to lower side of the device.
•
Wear an anti-static wrist strap and connect it to the grounded ESD safe mat.
•
The product’s composition may vary depending on the country, region, or carrier.
For all cases of broken glass:
1 Wear safety goggles and cut-resistant gloves.
2 Remove the release film of the acrylic protective cover.
3 To prevent injuries and scattering caused by broken glass, attach an acrylic protective
cover.
If your device’s glass breaks, be careful not to injure your hands or other body parts
on debris.