Extended functions
52
Using the Magic Plus mode
Using the Picture in Picture mode
In Picture in Picture mode, you can capture or select a full-sized
background photo, and then insert a smaller photo or video into
the foreground.
1
Rotate the mode dial to .
2
Select .
•
To set the final video size when inserting a video, press
[ ], and then select →Movie Size → a desired
video size.
3
Half-press [Shutter] to focus, and then press [Shutter]
to capture a background photo.
•
To select a background photo from your saved photos, press
[ ], and then select →Open Image → a desired
photo. You cannot select a video file or a photo captured in
Panorama mode.
4
Press [ ] to set the photo as the background image.
•
To recapture a background photo, press [ ].
Retake Move Frame
5
Press [ ], and then press [ / / / ] to change
the insertion point.
6
Press [ ], and then press [ / / / ] to change
the insertion size.
7
Press [ ] to save the setting.
8
Half-press [Shutter] to focus, and then press [Shutter]
to capture and insert a photo.
•
The insertion window appears larger when you half-press
[Shutter], so that you can determine whether or not the
subject is in focus.
•
To record a video, press (Video recording). To stop
recording and insert the video, press
(Video recording)
again.
To Next Page
Loading...
