Connectingto a andconfigunngnetworkseSings
Learn to connect via an access point (AP) when you are in a range of a WLAN, You can also configure network settings.
Connecting to a WLAN
Rotate the mode dialto Wi-Fi,
2 Select @, @, _>, 2, or _,
{_ Press [MENU],and then select AP Setting,
• Insomemodes,press[MENU]orto/owthe onscreen
instructionsuntilthe APSettingscreenappears.
• Thecameraautomaticallysearchestot availableAP devices.
_:SSelect an AR
Samsung 2 (_1_) "@ !_
Samsung 3 _ _ _"
Sat,suing4 _ a _' i_!
• Select WPS PBC to connect to a WPS AR
• Select Refresh to refresh connectable APs,
• Select Add wireless network to add an AP manually,
¢i_) iAd hoc AP
I_ Secured AP
WPS AP
iSignal strength
Press [Q] to open AP setting options
• When you select a secured AR a pop-up window appears,
Enter the required passwords to connect to the WLAN, For
information about entering text, refer to "Entering text".
(p. 103)
• When a Iogin page appears, reterto "Using the Iogin browser".
(p, 101)
• When you select an unsecured AR the camera wi/connect
to the WLAN.
• Ifyou select a WPS profile supported AR select WPS PIN,
and then enter a PIN on the AP device, You can also connect
to a WPS profile supported AP by selecting WPS PBC on the
camera, and then pushing the WPS button on the AP device.
Wirelessnetwork(VVB150F/WB152Fonly) 100
To Next Page
Loading...
