32
Screen Setup
3
3 Screen Setup
3.3 Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
z
This menu is not available when Bright is in Cinema or Dynamic Contrast mode.
z
This menu is not available when Color is in Full or Intelligent mode.
3.3.1 Configuring Sharpness
1
Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2
Press [ ] to move to Picture
3
Press [ ] to move to Sharpness The following screen will
appear.
4
Adjust the Sharpness using the [ ] buttons.
To Next Page
Loading...
