38
Configuring Tint
4
4 Configuring Tint
4.2 Red
Adjust the value of the color red in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
This menu is not available when Color is in Full or Intelligent mode.
4.2.1 Configuring Red
1
Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2
Press [ ] to move to COLOR
3
Press [ ] to move to Red The following screen will appear.
4
Adjust the Red using the [ ] buttons.