50
Setup and Reset
6
6 Setup and Reset
6.6 Key Repeat Time
Control the response rate of a button when the button is pressed.
6.6.1 Configuring Key Repeat Time
1
Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2
Press [ ] to move to SETUP&RESET
3
Press [ ] to move to Key Repeat Time
will appear.
z Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4
5
The selected option will be applied.
and press [ ] on the product.
and press [ ] on the product. The following screen
Press [ ] to move to the option you want and press [ ].
To Next Page
Loading...
