SMT-i6021 Quick Reference Guide
Version 1.0 July 2015
SCM Default Feature Codes
While the most frequently used features appear as dedicated buttons or programmable
buttons on your phone, there are a host of additional features that can be used by
dialing the default codes listed in the table below.
Some feature codes require an extension, group number or orbit number. When using
these codes, replace the letter X with the appropriate digits. For example; to pick up a
ringing call at extension 2205, use the Direct Call Pickup code 65x where X is extension
2205. So the user dials 652205
X = extension number, group number, page zone number, speed dial number, pick-up
group number or park orbit number.
In/Out of Hunt Group - In
In/Out of Hunt Group - Out
Set Forward Busy/No Answer
Pick Up Ringing Station Call
Pick Up call in your group
Send Flash to C.O. or PBX
Idle Display Screen Function Menu Screen
Status Bar - shows icons for functions that are set
Main Screen – Selectable menus and call progress messages
Soft Key Options – Available menus for the phone status.
Function Menu Screen – Displays the available call functions for the current call state
SMT-i6021 IP Phone Quick Reference Guide
OfficeServ Default Feature Codes
OK button: Selects and
confirm menu
- Direction key: Navigates