92
Demo
Demo mode automatically shows you the major functions that are included with your camcorder so that you
may use them more easily.
system setting
Using the Demo function
• The Demo mode is cancelled in the following cases:
- If any button is operated (Recording start/stop, PHOTO, SMART AUTO, etc.) However,
the camcorder will enter the Demo mode automatically after 5 minutes in STBY mode if
it is idle for 5 minutes without operation. If you don’t want the Demo function to start, set
“Demo” to “Off.”
1. Press the MENU button
Control joystick (
/
)
“Settings”
Control joystick (
/
/OK)
“Demo.”
2. Select the desired submenu item with the Control joystick (
/
),
and then press the OK button.
3. To return to the normal screen, press the MENU button.
Submenu Items
items contents
on-screen
display
“Off”
Disable the function. -
“On”
Enables the Demo function. -
The Demo function does not operate in the following cases:
- If “Auto Power Off” is set to “5 Min”(uses the battery as main power), the Auto Power Off function
will operate prior to Demo.
Settings
Demo
Version
Language
To Next Page
Loading...
Need help?
General