Samsung SND-5061 - Smart codec setup (SND-7011;SND-7061)

setup screen
Smart codec setup (SND-7011/SND-7061)
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
1. From the Setup menu, select the
<Video (
)> tab.
2. Click <Smart codec setup>.
3. Set the image quality.
The ROI area will be displayed in the
specified quality.
4. Select a desired area with the mouse
pointer and drag it as much as you
want.
`
You can specify up to 5 distinct areas.
5. To cancel all the settings for the area, click the [Clear (
)] button.
6. When done, click [Apply (
)].
J
`
The Smart codec will not be active if it is set to <Off> in <Video profile>. (page 46)
56_ setup screen