Samsung SND-5061 - Alarm Input

setup screen
Alarm input
You can set the alarm input type, activation time, and operation mode.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Event setup >.
3. Select <Alarm input> from <Event
action setup>.
4. Set whether or not to <Enable>.
5. Specify an input device.
• Type
- Normal open : It is normally open,
but if it is closed, an alarm will be
triggered.
- Normal close : It is normally
closed, but if it is open, an alarm will be triggered.
6. Specify the <Activation time>.
• Always : Always check if an alarm occurs. It activates in operated mode when
the alarm occurs.
`
If set to Always, the activation time cannot be changed.
• Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
• [Clear (
)] : Deselect the selected times.
7. Specify an operation that will perform if an alarm occurs.
• FTP : Specify the use of FTP transfer in the alarm input setup.
• E-mail : Specify the use of email transfer in the alarm input setup.
8. When done, click [Apply (
)].
68_ setup screen