Samsung SND-5061 - Page 78

setup screen
Profile access
You can check the profile information.
1. From the Setup menu, select the
<System (
)> tab.
2. Click <Profile access>.
• Profile access : Show the
information of the newly added
profile.
- Profile : Show the information of
the newly added codec.
- Bitrate(kbps) : Show both the actual bit rate and the set bit rate.
- Framerate(fps) : Show both the actual frame rate and the set frame rate.
- ATC(%) : Show the ATC status.
- Concurrent users count : Show the number of concurrent users who access the
profile.
• Current users : Show the information of all users who access the camera.
- Profile : Show the name of the profile accessed by the user.
- IP address : Show the IP address of the current user.
- Bitrate(kbps) : Show the current bit rate.
- Network connection status : You can check the network connection status.
78_ setup screen