setup screen
80_ setup screen
4. Select each profile properties.
For more details, refer to “To Add/Change the Video Profile”. (Page 82)
5. Click the input box of each item and enter / select a desired value.
`
The context menu may differ depending on the selected codec type.
• Default profile : If no profile is selected when using the Web Viewer, the default
video profile is applied.
• E-mail/FTP profile : Video profile to be transferred to the specified email or FTP
site.
`
Only the MJPEG codec can be set as the E-mail/FTP profile.
• Record profile : This is the profile that is applied to video recording.
• Audio-In : Sets whether to use audio for video recordings.
6. According to your situation, set ATC (Auto Transmit Control) mode.
• ATC mode : It adjusts the video
properties according to the variance
in the network bandwidth, controlling
the bit rate. Adjusting the bit rate
depends on the ATC mode.
- Control framerate : Reduce the frame rate if the network bandwidth drops down.
- Control compression : Control the compression rate if the network bandwidth
drops down.
Compression adjustment can cause deterioration of the image quality.
`
If <Bitrate control> is set to <CBR>, the encoding priority according to the ATC mode will be
fixed as below:
Bitrate control / ATC mode Control framerate Control compression
CBR Framerate Compression
To Next Page
Loading...
