installation & connection
22_ installation & connection
Power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
Be careful not to reverse the polarity when you connect the power cable.
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
If PoE and DC 12V are both applied, this camera will get supplied with power from PoE.
Please make sure the monitor and camera are turned off when connecting them.
Connecting to Audio Input/Output
J
PC
Network
Speaker
Microphone
Amp
Amp
Microphone
Microphone
Speaker
To Next Page
Loading...
