14
SPEED DOME CAMERA ACCESSORIES
15
SPEED DOME CAMERA ACCESSORIES
STH-380PO/370PO/370PI/360PO
STH-380PO/370PO/370PI/360PO
■ 3.2 Ceiling Mount Type Installation
This guideline is based on the installation of the ceiling flange STB-30PF.
STH-380PO
STH-370PO
STH-360PO
STH-370PI
STB-496PPV
STB-30PF
To attach the
camera
To detach the
camera
UNLOCK
Unlock Button
✽
To attach or detach the camera, refer to the picture.
* Attaching the camera: Hold up the camera and push it to the mount as shown in the
picture. Push the camera until you hear a “click”.
* Detaching the camera: To detach the camera, pull the camera downward while pushing
the unlock buttons on the camera upward.
10. Assembling Dome Cover
Once the camera is successfully attached, secure
the mount with the transparent dome cover. Next,
turn on the power.
11. Dome Cover Setting
Once the installation is complete, please optimize
the camera focus settings. On the camera’s OSD
Menu, set the Dome Cover setting to Outdoor.
(Directory: Main Menu/Camera Setting/Others)
Pendant Type Installation Pendant Type Installation
Others
Sync INTERNAL
Stabilizer OFF
③ Image Adj
Freeze OFF
Dome Cover Outer
To Next Page
Loading...
Need help?
General
