Bluetooth 136
Bluetooth
5. Select the device you wish to pair with and press the left
softkey for Add to List.
6. Enter the passkey and press . The default passkey is
0000.
7. The name of the Bluetooth device is displayed. Press the
left softkey for Done.
8. Highlight the device and press the left softkey for
Connect. Connection Successful will display if the device
is connected properly.
Waiting for Pairing
If you are going to be using a Dial-Up Network (DUN) profile to pair
with a PC or PDA, you will need to allow the other device to initiate
pairing with your phone.
To allow your phone to be paired with another Bluetooth device:
1. Press , followed by for Tools.
2. Press for Bluetooth.
3. If no devices are currently listed, press the left softkey
for Add New. Otherwise press the right softkey for
Options and select Add New.
4. Select Wait for request and press .
5. Select Visible for 3min and press .
6. Follow the on screen prompts to enter your passkey and
press . The default passkey is 0000.
5
JKL
To Next Page
Loading...
