Phone Basics 16
Phone Basics
2. Enter a phone number. (If you make a mistake while dialing,
press to erase one digit at a time. Press and hold
to erase the entire number.)
Tip: Based on the number entered, the phone will display the
province or state underneath the number dialled. This feature works
for numbers in Canada and the U.S.A. only. This can help you
determine if you are making a long distance call. Toll free numbers
are not location specific and no province or state name will be
displayed.
3. Press to call.
4. Press or close the phone when you are finished.
Tip: To redial your last recent call, press twice.
You can also place calls from your phone by using Voice Service
(page 81), Speed Dialing numbers from your Contacts (page 22), and
using your Call History listings (page 95).
Answering Calls
To answer an incoming call:
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. Press to answer an incoming call. (Depending on your
phone’s settings, you may also answer incoming calls by
opening the phone or by pressing any number key. See “Call
Answer Mode” on page 124 for more information.)
Your phone notifies you of incoming calls in the following ways:
• The phone rings or vibrates (unless set to Silence All).
• The backlight illuminates.
BACK BACK
TALK
To Next Page
Loading...
