Tools 82
Tools
Using Voice Dial
Voice Dial allows you to dial any valid 7, 10 or 11 digit North
American phone number by speaking the number naturally, without
pausing between the digits. It also allows you to dial by pronouncing
a name stored in your Contacts.
Tips for using Voice Dial:
• Voice Dial works best in quieter environments.
• When saying a number, speak at a normal speed and say each
digit clearly. There is no need to pause between digits.
• The phone recognizes the digits one, two, three, four, five, six,
seven, eight, nine, zero, and oh. The phone does not
recognize numbers such as "one eight hundred" for "1-800."
Instead, say "one-eight-zero-zero."
• The phone recognizes only valid 7, 10 or 11 digit North
American phone numbers.
• If your phone does not usually recognize you correctly when
you are using Voice Dial, try adapting Voice Dial to your voice,
which can significantly improve accuracy for some speakers.
(See "Changing Voice Dial Sensitivity" on page 87 for details.)
To place a call using Voice Dial:
1. Activate voice service by pressing and holding . (The
phone prompts you for a command.)
2. Say Voice Dial. (The phone prompts you to say the number
or Contact name.)
3. Say either a name stored in your Contacts or a valid 7, 10 or
11 digit North American phone number naturally and
clearly.
TALK
To Next Page
Loading...
