19 Phone Basics
End-of-Call Options
After receiving a call from or making a call to a phone number that is
not in your Contacts, the phone number and the duration of the call
are displayed. Press the right softkey for Next followed by to
Save the new number in your Contacts. (See “Saving a Phone
Number” below for more information.)
Note: The End-of-Call options are not displayed for calls identified as
Unknown ID or Restricted number.
Saving a Phone Number
Your phone can store up to 299 Contacts numbers. Contacts entries
can store up to a total of five phone numbers, and each entry’s name
can contain up to 20 characters. (For more information, see "Adding
a New Contact" on page 98.)
To save a number from standby mode:
1. Enter a phone number and press .
2. Highlight New Entry and press . If your Contacts list is
empty, skip this step and proceed to step 3.
3. Select the Type using the navigation key and press
.
4. Enter the Name using the keypad. Press to enter a
space, and press when you are done.
5. Press the left softkey for Done.
After you have saved the number, the new Contacts entry is
displayed.
• Mobile • Home • Work
• Pager • Others
3
DEF
Space
To Next Page
Loading...
