Samsung SpinPoint M8 - Smart Read Data (D0 h)

Spinpoint M8 Product Manual REV 2.7
66
8.2.34.5 Smart read data (D0h)
This command returns the Device SMART data structure to the host.
Table 8-15 Device SMART Data Structure
Byte F/V Descriptions
0
V
Data Structure Revision Number
2
V
1
st
Device Attribute
14
V
2
nd
Device Attribute
26
V
3
rd
Device Attribute
… … …
350
V
30
th
Device Attribute
362
V
Off-line data collection status
363
X
Self-test execution status byte
364-365
V
Total time in seconds to complete off-line data collection activity
366
X
Vendor specific
367
F
Off-line data collection capability
368-369
F
SMART capability
370
F
Error logging capability
7-1 Reserved
0 1=Device error logging supported
371
X
Vendor specific
372 F
Short self-test routine recommended polling time (in minutes)
373
F
Extended self-test routine recommended polling time (in minutes)
370-385
R
Reserved
386-510
X
Vendor specific
511
V
Data structure checksum
Key:
F = the content of the byte is fixed and does not change.
V = the content of the byte is variable and may change depending on the state of the device or the
commands executed by the device.
X = the content of the byte is vendor specific and may be fixed or variable.
R = the content of the byte is reserved and shall be zero.