DRAFT
FOR INTERNAL USE ONLY
Settings 142
Roaming Settings
When you are outside your home network area, your device can still connect to other networks that your
provider supports via roaming. There may be additional costs for accessing networks while roaming, so
you may want to control your device’s roaming behavior with Roaming settings.
1. From a Home screen, tap Apps > Settings.
2. Tap More networks > Roaming.
3. Configure options:
Roaming network: Select a roaming default. Choose Home only, to only connect to the
Sprint network, or Automatic, to allow connections to Sprint’s partner networks, when
available.
Roaming settings: Choose options for roaming, including Voice and data for Domestic
CDMA and International CDMA networks, and Data for GSM networks (if supported by your
device).
Roaming guard: Choose options for preventing roaming for certain functions. Enable or
disable roaming access for Voice and data for Domestic CDMA, Voice, Data and Outgoing
SMS for International CDMA networks, and Voice, Data and Outgoing SMS for GSM
networks (if supported by your device).
NFC Settings
Use NFC (Near Field Communication) to share information between your device and another NFC device
by touching the devices together, typically back-to-back.
NFC is used with S Beam and Android Beam, and must be turned on to use these features.
Turn NFC On or Off
Use NFC (Near Field Communication) to share information between your device and another NFC-
capable device or NFC tag, by touching the devices together, typically back-to-back. For example, you
can beam web pages from the browser, contacts from Contacts, and videos from YouTube. The app
determines what is beamed.
1. From a Home screen, tap Apps > Settings.
2. Tap NFC, and then tap the ON/OFF switch beside NFC to turn NFC on or off.
Android Beam Settings
With Android beam, you can transmit app content via NFC to other NFC devices that support Android
Beam.
Android Beam uses NFC, so NFC must be turned on before you can turn on Android Beam.
To Next Page
Loading...
