DRAFT
FOR INTERNAL USE ONLY
Web and Data 85
Turn Hotspot On or Off
To conserve battery life, turn Hotspot on when you need it and turn it off when you’re finished. You can
control Hotspot from Settings.
1. From a Home screen, tap Apps > Settings.
2. Tap Hotspot, and then tap the ON/OFF switch beside Hotspot to turn Hotspot on or off.
Connect a Device to Your Device’s Hotspot
When you connect a device to your device’s Hotspot feature, the device can access your device’s
connection to the mobile data network.
1. From a Home screen, tap Apps > Settings.
2. Tap Hotspot, and then tap the ON/OFF switch beside Hotspot to turn Hotspot on.
3. On the other device, scan for Wi-Fi hotspots, and then select your device’s hotspot.
Your device’s Network SSID will appear in the list of available devices. To find your device’s
Network SSID, go to Settings > Hotspot. The network SSID is displayed near the top of
the screen.
4. At the prompt, enter your device’s password.
Your device uses WPA2 security, which requires a password. To find your device’s
password, go to Settings > Hotspot, and look for the password in the connection
instructions.
Virtual Private Networks (VPN)
From your device, you can add, set up, and manage virtual private networks (VPNs) that allow you to
connect and access resources inside a secured local network, such as your corporate network.
Prepare Your Device for VPN Connection
Depending on the type of VPN, you may be required to enter your login credentials or install security
certificates before you can connect to your company’s local network. You can get this information from
your network administrator.
To connect to a VPN, you must have Mobile data enabled, or your device must be connected to a Wi-Fi
network. For information about setting up and using these connections on your device, see Data Usage
Settings and Turn Wi-Fi On and Connect to a Wireless Network.
To Next Page
Loading...
