5. Lift up the Flex door from the rails.
Putting too much food into the freezer
drawers can prevent the freezer from
closing completely and can cause frost
build-up.
RE-ASSEMBLING THE FLEX
DOOR
To reattach the flex doors, assemble parts in
reverse order.
Be sure to connect the Flex Door Wire
Connector. If it is not connected, the Flex
Room does not work.
CAUTION
CAUTION
DISASSEMBLING THE
FREEZER DOOR
1. Take out the upper drawer by lifting it up.
2. Remove the freeze room guard (1) by lifting
the guard up.
(1)
3. Take out the lower basket (2) by lifting the
basket up from the rail system.
(2)
4. Press the fixing hook of the rail system.
English - 22
DA68-03022B (EN)-04.indd 22 14. 6. 23. �� 2:47
To Next Page
Loading...
