Basic functions
31
Preventing your subject from being out of focus
It may be difficult to get your subject in focus when:
-
there is little contrast between the subject and background
(for example, when your subject is wearing clothing that is similar in
color to the background)
-
the light source behind the subject is too bright
-
the subject is shiny or reflective
-
the subject includes horizontal patterns, such as blinds
-
the subject is not positioned in the center of the frame
Turn on the flash.
(p. 52)
Use the Continuous
or Motion Capture
function. (p. 68)
Using the focus lock
Half-press [Shutter] to focus. When the subject is in focus,
you can reposition the frame to change the composition.
When you are ready, press [Shutter] to capture your photo.
•
When you capture photos in low light
•
When subjects are moving rapidly
To Next Page
Loading...
Need help?
General
