User Manual
49
The SVR-945 is not equipped with a DVD device so you must connect the unit
with an external backup device. Connect an external backup device to the USB
or eSATA port, execute copy and select CD/DVD. On the media list, a CD/DVD device
whose type is [Ext] is displayed. Select the device and make a copy in the same way as
other models.
Type
: Select CD/DVD. Use the up or down arrow key on the front or the
mouse wheel to select it. Press the [Enter] button and use the up or
down arrow key on the front or the mouse wheel to change the value.
Channel
: You can select some or all of the 16 channels. Select the channel
field and press the [Enter] button or use the mouse wheel to select a
channel.
From
: Enter the start date and time for copying. Use the up or down arrow
key or the mouse wheel to set the value.
To
: Enter the final date and time for copying. Use the up or down arrow
key or the mouse wheel to set the value.
Select Disk
: Select the media to copy. Select the Select Disk field and press the
[Enter] button to select the media.
Start
: Start copying. Move to the [Start] button and press the [Enter] button
or left-click.
FAT32 Format
: Format a USB disk or HDD in FAT32.
Do not use this for CD/DVD copying. When using media, you need to
format it first. Select the [FAT32 Format] button and press the [Enter]
button or left-click.
To Next Page
Loading...
