How to fix Samsung SVR-945 that won't connect to the network?
If your Samsung DVR is not connecting to the network, ensure the network cable is properly connected. Also, verify the DVR's IP address and the PC's IP address. You can also perform a Ping Test. If the Web Viewer is not running correctly, check the PC's specifications.
What to do if my Samsung DVR monitor won't display anything?
If your Samsung DVR's monitor displays nothing, first check the monitor's power supply. Then, verify the connection between the DVR and the monitor, as well as the monitor's cable port. Ensure that the DVR is turned on. If the images are in black and white, check the camera type (NTSC/PAL) and reboot.
Why is my Samsung SVR-945 not recording video?
If the video on your Samsung DVR won’t record, check the HDD connection status from the Disk Manager. Also, verify the Recording settings.
What to do if Samsung SVR-945 DVR remote won't work?
If the remote for your Samsung DVR isn’t working, start by checking the batteries. Then, check the remote’s ID and its specifications.
Why won't my Samsung DVR recordings play?
If the recordings on your Samsung DVR won’t play, check the Recording settings and the button activity.
How to fix some dead channels on Samsung SVR-945?
If some channels on your Samsung DVR are dead, check the camera’s power supply and input status. Also, check the DVR’s input port, the Activity setting under the Screen menu, and the Covert setting under the Monitor menu.
Why are Samsung SVR-945 DVR images too dark or bright?
If the images on your Samsung DVR are too dark or bright, check the camera’s configuration. Separate the visual input cable from power supplies. Also, check the Brightness and Contrast settings under the Screen menu.
What to do if the buttons aren’t working on Samsung SVR-945?
If the buttons on your Samsung DVR aren’t working, check the DVR’s power supply and the Screen Lock setting.
How to fix Samsung SVR-945 that is not booting up?
If your Samsung DVR is not booting up, check the power supply and the power cord.
General| Compression | H.264 |
|---|---|
| Operating System | Embedded Linux |
| Hard Drive Capacity | Up to 2TB (supports SATA HDD) |
| Audio Output | 1 channel |
| Network Interface | Ethernet |
| Power Supply | 12V DC |
To Next Page
