User Manual
97
10's password is "00000000". The 16 channel-DVRs do not have a [0] (zero) button so they
use the [10] (ten) button instead.
Change Password
As shown in the image below, click Change P/W for a user you want to change.
The password input window appears. Use the number buttons on the front or the character input
window to enter a new password.
Click the [Change] button to save it.
Clicking the [Change] button displays a popup confirmation window that prompts you to change
password. Click Yes.
The password has been changed.
Permissions
Using permission restricted features requires a password check. Execute a command to open
the password input window. Select a user and enter his/her password. Now the function is
available.
[Permission check]
6.10 Exit
This exits with or without saving menu settings.
To Next Page
Loading...
