User Manual
74
6.7.4 Event Action
This sets actions based on event input.
Event Action
For Event Action, you can select Relay 1~4, buzzer, or E-Mail.
Action Duration
Action Duration is used to maintain an action for a specified time when relay or buzzer is set. If
E-Mail is set, e-mails are sent in specified time intervals.
Normal Event Source
You can set Normal Event Source to 16 Sensors, 16 MDs, 16 Video Losses and Text,
Emergency.
※ SVR-480 does not support Digital I/O, thus it does not display “Emergency” on select mode.
To Next Page
Loading...
