What to do if my Samsung DVR does not turn on?
If your Samsung DVR doesn't turn on, check if the power supply is properly connected and ensure the system is receiving the correct input voltage from the power source. If it still doesn't turn on, the power supplier may be faulty and need replacement.
What to do if the REC button on my Samsung DVR doesn't work?
If the REC button on your Samsung DVR isn't working, check if there is free space on the HDD for recording and verify that the record mode is set to ON in the record mode setting.
Why won't the cursor move to the Start button on my Samsung DVR calendar search?
Ensure that the channel and date you want to play on your Samsung DVR are marked with the V symbol.
What to do if some channels on my Samsung DVR display a black screen?
If some channels on your Samsung DVR display a black screen, first check if the camera connected to the system properly displays the image and is properly supplied with power. If you are using a video distributor connected to multiple systems, try inputting the camera's video source directly into the DVR to rule out a weak signal issue.
Why does the Channel button not work on the Live screen of my Samsung SRD-842?
The Channel button won't work on the Live screen of your Samsung DVR if the current screen is in event monitoring mode. To exit this mode, press the [ALARM] button. Then you can select a channel.
What to do if the alarm on my Samsung SRD-842 DVR won't turn off?
To release the alarm on your Samsung DVR, press the [MENU] button and follow these steps: 1) To release the event monitoring mode: Monitoring Mode – set the duration of the event monitoring to Off. 2) To release the alarm sound: Event Record Mode - Alarm (Motion Detection/Video Loss/Tampering Detection) – deactivate the alarm sound. 3) To release the event: Event Record Mode - Alarm (Motion Detection/ Video Loss/Tampering Detection) – set the mode to Off.
What to do if the PTZ button doesn't work on my Samsung SRD-842?
Go to Menu ? Camera ? Check if the current protocols and other settings in the PTZ device are properly configured according to the PTZ camera.
Why doesn't my Samsung SRD-842 recognize all installed HDDs?
It takes time for the Samsung DVR to recognize multiple external HDDs. Try again in a moment. If the problem persists, it may be due to a mechanical error of the installed HDD.
Crucial safety guidelines for using the unit.
Prerequisites and checks for proper product installation.
Procedure for installing a Hard Disk Drive into the DVR.
Guide to connecting the DVR to a network via Ethernet.
Steps to power on and initialize the DVR for operation.
Accessing and configuring system-wide settings.
Configuring device settings, including cameras and network.
Checking status and information of connected storage devices.
Configuring recording schedules and parameters.
Configuring recording options for various event types.
Detailed guide for network connection types (Static, DHCP, PPPoE).
Managing user access levels and system permissions.
Procedures for updating the DVR's firmware.
Configuring PTZ camera control settings like port and protocol.
Setting up the DVR's network connection and protocols.
How to control PTZ cameras connected to the DVR.
Accessing and performing searches for recorded data.
Playing back recorded video data from storage.
Step-by-step guide to connect to the DVR using a Windows browser.
Detailed instructions for controlling PTZ cameras via the web interface.
Managing user permissions and access control for the web viewer.
Configuring network settings remotely.
Factory default configurations for system and device settings.
Common problems and their solutions for the DVR.
General| Compression Format | H.264 |
|---|---|
| Network Interface | Ethernet |
| Power Supply | 12V DC |
| Recording Rate | 240fps |
| Hard Drive Bays | 1 |
| Operating System | Embedded Linux |
| USB Ports | 2 |
| Remote Viewing | Yes |
| Motion Detection | Yes |
| Operating Temperature | 0°C to 40°C |
| Channels | 8 |
| Video Output | HDMI, VGA |
| Audio Inputs/Outputs | 1 input, 1 output |
| Video Input Channels | 8 channels |
To Next Page
