What to do if ESC key doesn't exit full screen on Samsung SRD-850 DVR WebViewer?
If pressing the ESC key in full screen mode of the WebViewer on your Samsung DVR doesn't switch the system to a normal split mode, press the ALT+TAB keys to select ‘ACTIVE MOVIE’ and then press the ESC key again.
What to do if my Samsung SRD-850 DVR displays 'NO HDD' icon?
If your Samsung DVR displays the “NO HDD” icon and an error message, check the HDD for connection. If the problem persists in a normal condition, contact the nearest service center to have the HDD checked by the service personnel.
What to do if my Samsung DVR does not recognize all installed disks?
If your Samsung DVR does not recognize all the installed disks, it may simply need more time to recognize multiple external HDDs, so try again in a moment. If the problem persists, it may occur due to a mechanical error of the HDD installed, so try again with a different HDD.
Why does my Samsung DVR display a black screen on some channels?
If some channels on your Samsung DVR display a black screen even if they receive video sources, first check if the camera connected to the system properly displays the image and if the camera is properly supplied with power. Sometimes, this problem may occur on a channel with weak video signal from a video distributor that is connected to multiple systems. In this case, input the video source of the camera directly into the DVR.
Why is the time bar not showing in search mode on my Samsung SRD-850 DVR?
The timeline on your Samsung DVR can switch between normal and extension mode. If the time bar is not displayed in Search mode, switch to normal mode or use the left or right button to navigate through the time bar.
How to exit full screen mode on Samsung SRD-850 DVR WebViewer?
Press the ALT+TAB keys to select ‘ACTIVE MOVIE’ and press the ESC key again.
How to improve the recording quality on my Samsung SRD-850 DVR?
If the image quality of the recording data on your Samsung DVR isn't satisfactory, try increasing the resolution and quality level in Menu – Record – Quality / Resolution. Select a bigger size when specifying the recording size (4CIF>2CIF>CIF). Specify a bigger level for the recording quality. Keep in mind that increasing resolution and recording quality will increase the data size, filling the HDD faster and overwriting existing data sooner.
What to do if the REC button doesn't work on my Samsung SRD-850?
If you press the [REC] button on the front panel of your Samsung DVR and the REC indicator doesn't flash, and the player doesn't start recording, check if there is free space on the HDD. Also, verify that the record mode is set to ON in the record mode setting.
How to fix a Samsung SRD-850 that does not turn on?
If your Samsung DVR does not turn on and the indicator on the front panel remains off, check whether the power supply system is properly connected. Also, verify the system's input voltage from the power source. If the problem continues, it might be necessary to inspect the power supplier and replace it if needed.
Why does my Samsung DVR say 'Need to reset date/time'?
If your Samsung DVR displays a message saying “Need to reset date/time,” it means there's an issue with the internal clock's time setting or the clock itself. In this case, it is recommended to contact the retailer or a service center for further assistance.
Essential guidelines for safe operation and use of the unit.
Notices and recommendations before using the DVR, including copyright and liability.
Important security advice regarding default passwords and network security.
Recommendations for ensuring a suitable environment for DVR installation.
Instructions for installing the DVR using a bracket-rack.
Steps and precautions for installing additional Hard Disk Drives.
Guide for connecting video, audio, and monitor outputs/inputs.
Guide for connecting USB devices like memory, HDD, or CD/DVD players.
Instructions for connecting external SATA HDDs for storage.
Procedure for connecting RS-485 devices, including PTZ cameras.
Steps for connecting the DVR to a network via Ethernet.
Procedure for accessing the DVR with user credentials.
Explanation of icons displayed on the live DVR screen and their meanings.
How to switch and manage different screen layouts for live viewing.
Using the zoom function to enlarge specific areas in live view.
Displaying events like sensor, motion, or video loss in sync with live video.
Configuring system properties, devices, recording, events, backup, and network.
Setting user permissions, groups, and managing user accounts.
Configuring cameras, PTZ, storage, and monitor settings.
Configuring recording schedules, event detection, and alarm settings.
Configuring network environment for remote monitoring and mail forwarding.
Performing searches for recorded data by time or event criteria.
Searching recorded video data based on specific dates and times.
Searching for events by channel and playing back the event footage.
Searching for backup data from connected backup devices.
Searching for recorded video based on detected motion within specific areas.
Playing back stored data from HDD or backup devices.
Overview of Web Viewer capabilities and system requirements.
Steps to connect to the DVR using a web browser.
Navigating and using the live viewer interface for remote monitoring.
Changing the display mode between single, quad, nine, or sixteen camera views.
Capturing and printing live screen images to a PC.
Controlling PTZ cameras remotely through the web viewer.
Accessing and searching recorded video remotely via web viewer.
Playing back video files backed up in SEC format.
Description of controls for audio, printout, tamper detection, zoom, speed, and playback.
Detailed technical specifications for various DVR models.
Physical dimensions and layout of the DVR unit.
Factory default configurations for system, device, recording, and network.
Common issues and their solutions for system operation.
Information regarding software components licensed under open source.
To Next Page
General
