For detailed information concerning cable connections, refer to Connecting Cables under Setup.
The monitor's rear configuration may vary slightly depending on the monitor model.
Remove the cover to connect the cables. (Pull the joining part to remove the cover.)
A Power Connection Terminal (14V DC)
This product may be used with 90 ~ 264. (Voltage
is automatically adjusted by the power adaptor.)
Connect the power source plug when all cables are
connected.
B Video Connection Terminal
1 PC connection terminal (15 pin D-SUB)
2 S-Video(V1) connection terminal (S-VHS)
3 Video(V2) connection terminal (RCA)
C Audio Connection Terminal
1 Left audio(L) connection terminal (Input)
2 Right audio(R) connection terminal (Input)
3 PC sound(Stereo) connection terminal (Input)
4 Headphone connection terminal (Output)
D Antenna Connection Terminal (When TV is
connected)
E Anti-Theft Security Lock
User's Manual - 11
Introduction-Rear
To Next Page
Loading...
